ICSNPP-ETHERCAT
Industrial Control Systems Network Protocol Parsers (ICSNPP) - Ethercat.
Overview
ICSNPP-Ethercat is a Zeek plugin for parsing and logging fields within the Ethercat protocol.
This plugin was developed to be fully customizable. To drill down into specific Ethercat packets and log certain variables, users can add the logging functionality to scripts/icsnpp/ethercat/main.zeek. The functions within scripts/icsnpp/ethercat/main.zeek and src/events.bif are good guides for adding new logging functionality.
This parser produces eight log files. These log files are defined in scripts/icsnpp/ethercat/main.zeek.
- ecat_registers.log
- ecat_log_address.log
- ecat_dev_info.log
- ecat_aoe_info.log
- ecat_coe_info.log
- ecat_foe_info.log
- ecat_soe_info.log
- ecat_arp_info.log
For additional information on these log files, see the Logging Capabilities section below.
Installation
Installing Zeek
Package Manager
This script is available as a package for Zeek Package Manger
zkg refresh
zkg install icsnpp-ethercat
If this package is installed from ZKG, it will be added to the available plugins. This can be tested by running zeek -N. If installed correctly, users will see ICSNPP::ETHERCAT.
If ZKG is configured to load packages (see @load packages in quickstart guide), this plugin and these scripts will automatically be loaded and ready to go. ZKG Quickstart Guide
If users are not using site/local.zeek or another site installation of Zeek and want to run this package on a packet capture, they can add icsnpp/ethercat to the command to run this plugin's scripts on the packet capture:
git clone https://github.com/cisagov/icsnpp-ethercat.git
zeek -Cr icsnpp-ethercat/tests/traces/ethercat_example.pcap icsnpp/ethercat
Manual Install
To install this package manually, clone this repository and run the configure and make commands as shown below.
git clone https://github.com/cisagov/icsnpp-ethercat.git
cd icsnpp-ethercat/
./configure
make
If these commands succeed, users will end up with a newly created build directory that contains all the files needed to run/test this plugin. The easiest way to test the parser is to point the ZEEK_PLUGIN_PATH environment variable to this build directory.
export ZEEK_PLUGIN_PATH=$PWD/build/
zeek -N # Ensure everything compiled correctly and you are able to see ICSNPP::ETHERCAT
Once users have tested the functionality locally and it appears to have compiled correctly, they can install it system-wide:
sudo make install
unset ZEEK_PLUGIN_PATH
zeek -N # Ensure everything installed correctly and you are able to see ICSNPP::ETHERCAT
To run this plugin in a site deployment, users will need to add the line @load icsnpp/ethercat to the site/local.zeek file to load this plugin's scripts.
If users are not using site/local.zeek or another site installation of Zeek and want to run this package on a packet capture, they can add icsnpp/ethercat to the command to run this plugin's scripts on the packet capture:
zeek -Cr icsnpp-ethercat/tests/traces/ethercat_example.pcap icsnpp/ethercat
If users want to deploy this plugin on an already existing Zeek implementation and don't want to build the plugin on the machine, they can extract the ICSNPP_ETHERCAT.tgz file to the directory of the established ZEEK_PLUGIN_PATH (default is ${ZEEK_INSTALLATION_DIR}/lib/zeek/plugins/).
tar xvzf build/ICSNPP_Ethercat.tgz -C $ZEEK_PLUGIN_PATH
Logging Capabilities
ECAT Registers (ecat_registers.log)
Overview
This log captures register memory address read and writes ecat_registers.log.
This log is also the catch all. Before it gets to this point it is sent through more parsing routines to pull out any other information (i.e., CoE, AoE, FoE, EoE, and SoE mailbox data).
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| srcmac | string | Source MAC address |
| dstmac | string | Destination MAC address |
| Command | string | EtherCAT command |
| Slave_Addr | string | EtherCAT slave address |
| Register_Type | string | Register information |
| Register_Addr | string | Memory address being accessed |
| data | string | Data to be read or wrote to memory address |
ECAT Address read write (ecat_log_address.log)
Overview
This log captures Logical Read and writes to addresses and logs them to ecat_log_address.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| srcmac | string | Source MAC address |
| dstmac | string | Destination MAC address |
| Log_Addr | string | Address data is being accessed from |
| Length | count | Length of data |
| Command | string | EtherCAT command |
| data | string | Data read or write |
ECAT Device Info (ecat_dev_info.log)
Overview
This log captures ECAT Device info and logs it to ecat_dev_info.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| slave_id | string | Ethercat slave address |
| revision | string | Revision of EtherCAT controller |
| dev_type | string | Type of EtherCAT controller |
| build | string | Build version |
| fmmucnt | string | Fieldbus memory management unit supported channel count |
| smcount | string | Sync manager count |
| ports | string | Port descriptor |
| dpram | string | Ram size |
| features | string | Features supported |
ECAT AoE Info (ecat_aoe_info.log)
Overview
This log captures AoE (ADS over Ethercat, Automation Device Specification) information and logs it to ecat_aoe_info.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| targetid | string | Target network ID |
| targetport | string | Target port |
| senderid | string | Sender network ID |
| senderport | string | Sender port |
| cmd | string | Command |
| stateflags | string | State flags |
| data | string | Command data |
ECAT CoE Info (ecat_coe_info.log)
Overview
This log captures CoE (CAN over Ethercat) and logs it to ecat_coe_info.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| number | string | Message number |
| Type | string | Message type |
| req_resp | string | Request or response type |
| index | string | Index |
| subindex | string | Sub index |
| dataoffset | string | Data offset |
ECAT FoE Info (ecat_foe_info.log)
Overview
This log captures FoE (File Over Ethercat) information and logs it to ecat_foe_info.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| opCode | string | Operation code |
| reserved | string | Reserved |
| packet_num | string | Packet number |
| error_code | string | Error code |
| filename | string | Filename |
| data | string | Transferred data |
ECAT SoE Info (ecat_soe_info.log)
Overview
This log captures SoE (Servo over Ethercat) and logs it to ecat_soe_info.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| opCode | string | Command sent for controller |
| incomplete | string | Function check to determine if it has been processed |
| error | string | Error message |
| drive_num | string | Drive number for command |
| element_flags | string | Element flags |
| index | string | Message index |
ECAT ARP Info (ecat_arp_info.log)
Overview
This log captures ARP info that is passed through EoE (Ethernet over Ethercat) and logs it to ecat_arp_info.log.
Fields Captured
| Field | Type | Description |
|---|---|---|
| ts | time | Timestamp |
| arp_type | string | ARP command |
| mac_src | string | Source MAC address |
| mac_dst | string | Destination MAC address |
| SPA | addr | Sender protocol address |
| SHA | string | Sender hardware address |
| TPA | addr | Target protocol address |
| THA | string | Target hardware address |
ICSNPP Packages
All ICSNPP Packages:
Full ICS Protocol Parsers:
- BACnet
- Full Zeek protocol parser for BACnet (Building Control and Automation)
- BSAP
- Full Zeek protocol parser for BSAP (Bristol Standard Asynchronous Protocol) over IP
- Full Zeek protocol parser for BSAP Serial comm converted using serial tap device
- Ethercat
- Full Zeek protocol parser for Ethercat
- Ethernet/IP and CIP
- Full Zeek protocol parser for Ethernet/IP and CIP
- GE SRTP
- Full Zeek protocol parser for GE SRTP
- Genisys
- Full Zeek protocol parser for Genisys
- OPCUA-Binary
- Full Zeek protocol parser for OPC UA (OPC Unified Architecture) - Binary
- S7Comm
- Full Zeek protocol parser for S7comm, S7comm-plus, and COTP
- Synchrophasor
- Full Zeek protocol parser for Synchrophasor Data Transfer for Power Systems (C37.118)
- Profinet IO CM
- Full Zeek protocol parser for Profinet I/O Context Manager
Updates to Zeek ICS Protocol Parsers:
- DNP3
- DNP3 Zeek script extending logging capabilities of Zeek's default DNP3 protocol parser
- Modbus
- Modbus Zeek script extending logging capabilities of Zeek's default Modbus protocol parser
License
Copyright 2023 Battelle Energy Alliance, LLC. Released under the terms of the 3-Clause BSD License (see LICENSE.txt).